http://dx.doi.org/10.1016/j.gsf.2016.10.005

The Earth was born as a dry planet without atmosphere and ocean components at 4.56 Ga, with subsequent secondary accretion of bio-elements, such as carbon (C), hydrogen (H), oxygen (O), and nitrogen (N) which peaked at 4.37–4.20 Ga. This two-step formation model of the Earth we refer to as the advent of bio-elements model (ABEL Model) and the event of the advent of bio-elements (water component) as ABEL Bombardment. It is clear that the solid Earth originated from enstatite chondrite-like dry material based on the similarity in oxygen isotopic composition and among other isotopes. On the other hand, Earth's water derives primarily from carbonaceous chondrite material based on the hydrogen isotopic ratio. We present our ABEL model to explain this enigma between solid Earth and water, as well as secondary accretion of oxidizing bio-elements, which became a precursor to initiate metabolism to emerge life on a highly reductive planet. If ABEL Bombardment had not occurred, life never would have emerged on the Earth. Therefore, ABEL Bombardment is one of the most important events for this planet to evolve into a habitable planet. The chronology of ABEL Bombardment is informed through previous researches of the late heavy bombardment and the late veneer model. ABEL Bombardment is considered to have occurred during 4.37–4.20 Ga, which is the concept to redefine the standard late heavy bombardment and the late veneer models. Also, ABEL Bombardment is the trigger of the transition from stagnant lid tectonics to plate tectonics on this planet because of the injection of volatiles into the initial dry Earth.     

Anatomy of a Cambrian suture in Gondwana: Pacific-type orogeny in southern India?

Southern India occupies a central position in the Late Neoproterozoic–Cambrian Gondwana supercontinent assembly. The Proterozoic mosaic of southern India comprises a collage of crustal blocks dissected by Late Neoproterozoic–Cambrian crust-scale shear/suture zones. Among these, the Palghat–Cauvery Suture Zone (PCSZ) has been identified as the trace of the Cambrian suture representing Mozambique Ocean closure during the final phase of amalgamation of the Gondwana supercontinent. Here we propose a model involving Pacific-type orogeny to explain the Neoproterozoic evolution of southern India and its final amalgamation within the Gondwana assembly. Our model envisages an early rifting stage which gave birth to the Mozambique Ocean, followed by the initiation of southward subduction of the oceanic plate beneath a thick tectosphere-bearing Archean Dharwar Craton. Slices of the ocean floor carrying dunite–pyroxenite–gabbro sequence intruded by mafic dykes representing a probable ophiolite suite and invaded by plagiogranite are exposed at Manamedu along the southern part the PCSZ. Evidence for the southward subduction and subsequent northward extrusion are preserved in the PCSZ where the orogenic core carries high-pressure and ultrahigh-temperature metamorphic assemblages with ages corresponding to the Cambrian collisional orogeny. Typical eclogites facies rocks with garnet + omphacite + quartz and diagnostic ultrahigh-temperature assemblages with sapphirine + quartz, spinel + quartz and high alumina orthopyroxene + sillimanite + quartz indicate extreme metamorphism during the subduction–collision process. Eclogites and UHT granulites in the orogenic core define P–T maxima of 1000 °C and up to 20 kbar. The close association of eclogites with ultramafic rocks having abyssal signatures together with linear belts of iron formation and metachert in several localities within the PCSZ probably represents subduction–accretion setting. Fragments of the mantle wedge were brought up through extrusion tectonics within the orogenic core, which now occur as suprasubduction zone/arc assemblages including chromitites, highly depleted dunites, and pyroxene bearing ultramafic assemblages around Salem. Extensive CO₂ metasomatism of the ultramafic units generated magnesite deposits such as those around Salem. High temperature ocean floor hydrothermal alteration is also indicated by the occurrence of diopsidite dykes with calcite veining. Thermal metamorphism from the top resulted in the dehydration of the passive margin sediments trapped beneath the orogenic core, releasing copious hydrous fluids which moved upward and caused widespread hydration, as commonly preserved in the Barrovian amphibolite facies units in the PCSZ. The crustal flower structure mapped from PCSZ supports the extrusion model, and the large scale north verging thrusts towards the north of the orogenic core may represent a fold-thrust belt. Towards the south of the PCSZ is the Madurai Block where evidence for extensive magmatism occurs, represented by a number of granitic plutons and igneous charnockite massifs of possible tonalite–trondhjemite–granodiorite (TTG) setting, with ages ranging from ca. 750–560 Ma suggesting a long-lived Neoproterozoic magmatic arc within a > 200 km wide belt. All these magmatic units were subsequently metamorphosed, when the Pacific-type orogeny switched over to collision-type in the Cambrian during the final phase of assembly of the Gondwana supercontinent. One of the most notable aspects is the occurrence of arc magmatic rocks together with high P/T rocks, representing the deeply eroded zone of subduction. The juxtaposition of these contrasting rock units may suggest the root of an evolved Andean-type margin, as in many arc environments the roots of the arc comprise ultramafic/mafic cumulates and the felsic rocks represent the core of the arc. The final phase of the orogeny witnessed the closure of an extensive ocean — the Mozambique Ocean — and the collisional assembly of continental fragments within the Gondwana supercontinent amalgam. The tectonic history of southern India represents a progressive sequence from Pacific-type to collision-type orogeny which finally gave rise to a Himalayan-type Cambrian orogen with characteristic magmatic, metasomatic and metamorphic factories operating in subduction–collision setting.     

U–Pb zircon geochronology of the North Pole Dome adamellite in the eastern Pilbara Craton

Supracrustal rocks around the North Pole Dome area, Western Australia, provide valuable information regarding early records of the evolution of crustal processes, surface environments, and biosphere. Owing to the occurrence of the oldest known microfossils, the successions at the North Pole Dome area have attracted interest from many researchers. The Paleoarchean successions (Warrawoona Group) mainly comprise mafic‐ultramafic greenstones with intercalated cherts and felsic lavas. Age constraints on the sediments have been mainly based on zircon U–Pb geochronology. However, many zircon grains have suffered from metamictization and contain anomalously high contents of common Pb, which makes interpretation of the U–Pb data complicated. In order to provide more convincing chronological constraints, an U–Pb Concordia age is widely accepted as the best estimate. Most zircons separated from two adamellites also suffered from severe metamictization. In our analyses, less metamictized domains were selected using a pre‐ablation technique in conjunction with elemental mapping, and then their U–Pb isotopic compositions were determined with a laser ablation inductively coupled plasma mass spectrometry. Most analyzed domains contained certain amounts of common Pb (²⁰⁴Pb/²⁰⁶Pb > 0.000 1), whereas three and five U–Pb data points with less common Pb (²⁰⁴Pb/²⁰⁶Pb < 0.000 1) were obtained. These U–Pb datasets yielded U–Pb Concordia ages of ca 3 445 Ma and 3 454 Ma, respectively. These ages represent the timing of the adamellite intrusion, and constrain the minimum depositional age of the Warrawoona Group. In addition, a single xenocrystic zircon grain showed a ²⁰⁷Pb/²⁰⁶Pb age of ca 3 545 Ma, supporting the idea that the sialic basement of the Pilbara Craton existed prior to 3 500 Ma. The in situ U–Pb zircon dating combined with the pre‐ablation technique has the potentials to identify non‐metamictized parts and to yield precise and accurate geochronological data even from partially metamictized zircons.     

Clinopyroxene–a mineral telescoped through the processes of blueschist facies metamorphism

Abstract Textural evolution and compositional variation of clinopyroxenes in Ward Creek metabasites are described. Pyroxenes change, with increasing grade, from finegrained aggregates through fan-shaped medium-grained prisms to blocky coarse crystals. Characteristic features of metamorphic pyroxenes include: (1) the occurrence of coexisting pyroxene pairs, the compositions of which are used to delineate compositional gaps; (2) the existence of large compositional variations of pyroxenes, within a single specimen, which record a considerable span of P and/or T for crystallization; and, (3) the development of compositional trends in single specimens and in three metamorphic zones which are progressive in nature. The first formed clinopyroxene (Jd₂₀Aug₆₅Ac₁₅) in the lower lawsonite zone mimics the composition of relict igneous augite. It changes continuously, with increasing grade, at nearly constant low X_Jd content towards acmite. At a composition around Jd₂₀Aug₃₀Ac₅₀, the trend turns towards jadeite and intersects a solvus to form two coexisting clinopyroxenes in the middle lawsonite zone. At higher grade, the compositional gap becomes restricted towards the jadeite-omphacite join and clinopyroxene increases in X_Jd toward jadeite. A reversed compositional trend occurs at higher grade; clinopyroxenes decrease in jadeite component at nearly constant Aug/Ac ratio of 50/50 and finally become omphacite in the uppermost pumpellyite and epidote zones. The Na–Ca pyroxenes, close to the binary join Jd–Ac, occur in the lawsonite- and pumpellyite-zones, ranging from X_Jd= 1.0–0.30 together with Ab and Qz. The ubiquitous occurrence of aragonite at temperature estimates of 170–240° C by Taylor & Coleman (1968) for these zones does not support the low-temperature extrapolation of the Jd–Ab–Qz curve by Holland (1980). The estimated metamorphic field gradient indicates an inflection point at 7 kbar, 200° C. Below this, blueschist facies metamorphism proceeded under dominant pressure-increase from 4 to 7 kbar at nearly constant temperature, about 150–200° C, whereas at higher grade recrystallization, above the inflection point, the metamorphic temperature increased from 200 to 350° C at nearly constant pressure, about 7–8 kbar. Such an inflection point suggests the depth of underplating of either seamounts or accretionary packages in a subduction zone.     

Heat-Mitigation Effects of Irrigated Rice-Paddy Fields Under Changing Atmospheric Carbon Dioxide Based on a Coupled Atmosphere and Crop Energy-Balance Model

Boundary-Layer Meteorology - Known as the heat-mitigation effect, irrigated rice-paddy fields distribute a large fraction of their received energy to the latent heat during the growing season. The...     

The making and breaking of supercontinents: Some speculations based on superplumes, super downwelling and the role of tectosphere

The mechanisms of formation and disruption of supercontinents have been topics of debate. Based on the Y-shaped topology, we identify two major types of subduction zones on the globe: the Circum-Pacific subduction zone and the Tethyan subduction zone. We propose that the process of formation of supercontinents is controlled by super downwelling that develops through double-sided subduction zones as seen in the present day western Pacific, and also as endorsed by both geologic history and P-wave whole mantle tomography. The super-downwelling swallows all material like a black hole in the outer space, pulling together continents into a tight assembly. The fate of supercontinents is dictated by superplumes (super-upwelling) which break apart the continental assemblies. We evaluate the configuration of major supercontinents through Earth history and propose the tectonic framework leading to the future supercontinent Amasia 250 million years from present, with the present day Western Pacific region as its frontier. We propose that the tectosphere which functions as the buoyant keel of continental crust plays a crucial role in the supercontinental cycle, including continental fragmentation, dispersion and amalgamation. The continental crust is generally very thin, only about one tenth of the thickness of the tectosphere. If the rigidity and buoyancy is derived from the tectosphere, with the granitic upper crust playing only a negligible role, then supercontinent cycle may reflect the dispersion and amalgamation of the tectosphere. Therefore, supercontinent cycle may correspond to super-tectosphere cycle.     

A speculation on the structure of the D″ layer: The growth of anti-crust at the core–mantle boundary through the subduction history of the Earth

The growth curve of the continental crust shows that large amounts of continental crust formed in the early part of the Earth history are missing. In order to test a hypothesis that the former crust was subducted to the deep mantle, we performed phase assemblage analysis in the systems of mid-oceanic ridge basalt (MORB), anorthosite, and tonalite–trondhjemite–granite (TTG) down to the core–mantle boundary (CMB) conditions. Results show that all these materials can be subducted to the CMB leading to the development of a compositional layering in the D″ layer. We speculate that there could be five layers of FeO-enriched melt from partial melting of MORB, MORB crust, anorthosite, TTG, and slab or mantle peridotite in ascending order. Although the polymorphic transformation of perovskite to post-perovskite in (Mg,Fe)SiO₃ may explain the seismic discontinuity at the top of the D″ layer (D″ discontinuity), the effects of solid solution on the sharpness of the transformation suggest that the compositional layering is more plausible for the origin of the D″ discontinuity. The D″ layer can be an “anti-crust” made up mostly of TTG + anorthosite derived from the former continental crust. Tectonic style of the anti-crust at the CMB is similar to that at the surface. At both places, chemically distinct layers are density stratified and are also characterized by the processes of accretion, magmatism, and metasomatism.     

Counter-clockwise prograde P–T path in collisional orogeny and water subduction at the Precambrian–Cambrian boundary: The ultrahigh-pressure pelitic schist in the Kokchetav massif,northern Kazakhstan

A prograde pressure–temperature (P–T) path is estimated for pelitic schists from the latest Precambrian Kokchetav ultrahigh-pressure massif, Kazakhstan, using compositional zoning and mineral inclusions in coarse-grained and inclusion-rich garnets. Ti-bearing inclusions are abundant in garnet and display a zonal distribution. Ilmenite occurs in the inner-core, where most of it makes a composite inclusion with rutile, whereas monomineralic rutile occurs in the outer-core to mantle domains. In the rim region both ilmenite and rutile are present, although in small amounts. Application of the ilmenite-garnet thermometer yields a systematic temperature increase towards rim from 500 to 750 °C. The pressure-sensitive reaction: 3 Fe-Ilm (in Ilm) + Ky + 2 Qtz = 3 Rt + Alm (in Grt) yielded pressures of 1.2–1.3 GPa for the outer-core inclusions.A petrogenetic grid in the K₂O–CaO–FeO–MgO–Al₂O₃–SiO₂–H₂O model system was used to estimate the equilibrium compositions of the garnet. The change of the grossular component along the model P–T path expected from the forward modelling is close to the observed compositional profile of the outer-core to rim domains. No constraint is available from thermobarometry in the inner-core; however, the forward modelling of garnet zoning provides information on the early stage of the P–T path during the garnet growth.The estimated P–T path is counter-clockwise in the prograde stage with a steep bend at around 700 °C and 1.2–1.5 GPa. This is similar to the metamorphic P–T gradient of the Kokchetav massif. This result contrasts markedly with the traditional clockwise P–T path in many collisional metamorphic terranes, and is regarded to represent a subduction geotherm at the Precambrian–Cambrian boundary. The P–T path proposed in this study also supports the models for the recovery of the “snowball Earth” from late-Proterozoic glaciation through effect of water in the solid Earth mantle.     

Izu-Bonin arc subduction under the Honshu island, Japan: Evidence from geological and seismological aspect

The Izu-Bonin intra-oceanic arc with 20–35 km thick continental crust is being subducted under the Honshu, presumably since 17 Ma. Tomographic image clearly demonstrates that the whole Izu-Bonin arc is subducting under the Honshu arc. Geologic cross section and the thickness of continental crust do not support the accretion of thick crust in spite of the continued subduction over 17 Ma.     

Petrology, geochemistry and paleogeographic reconstruction of the East Sulawesi Ophiolite, Indonesia

The East Sulawesi Ophiolite (ESO) is tectonically dismembered and widely distributed in Central and East Sulawesi. It comprises, from base to top, residual mantle peridotite and mafic–ultramafic cumulate through layered to isotropic gabbro, to sheeted dolerites and basaltic volcanic rocks. Residual peridotite is dominantly spinel lherzolite intercalated with harzburgite and dunite. Ultramafic rocks from different locations display significant differences in rock composition and mineral. However, the clinopyroxene of peridotite displays REE pattern similarities with those of mid-ocean ridge (MOR) origin, rather than those of suprasubduction zone (SSZ) origin. The gabbroic unit consists of massive gabbro, layered gabbro, mafic and ultramafic cumulate and anorthosite. The observed crystallization sequence of gabbroic unit, which is olivine→(spinel)→plagioclase→clinopyroxene→(orthopyroxene)→(hornblende), and the mineral chemistry data indicate that the ESO gabbro has similarities with MOR setting.Major and trace element geochemistry of basalt and dolerite suggests MOR, oceanic plateau and minor SSZ origins. A possible oceanic plateau origin is supported by the following: (i) the 15-km thickness is comparable with the thickness of oceanic plateau rather than normal oceanic lithosphere; (ii) there are no or only minor olivine phenocrysts in the basalt; and (iii) predominance of aphyric texture in the basalts. The REE pattern of ESO basalt exhibits N-MORB-like signatures. However, a negative Nb anomaly in the trace element spider diagram may be attributed to mantle heterogeneity of an OPB source.The geochemical variations and disparities for both peridotite and basalt and the noncogenetic relationship between crust and mantle sections in several locations suggest that the ESO may have been formed at one tectonic setting and was later overprinted by magmatism in different environments through its birth to emplacement. A possible Cretaceous origin of an oceanic plateau component of the ESO is indicated on the basis of calculated paleopositions using plate trajectory analyses together with previously published paleolatitude data. The ESO can be traced back to the proximity of the presently active region of the SW Pacific Superplume.